In the modern production environment, all kinds of large-scale industrial machinery are an indispensable part, and large-scale casting machines are one of them. For such a huge equipment, if there is no correct operation method, not only the production will become inconvenient, but it will even bring certain safety hazards to the operators. Let's take a look at the correct operation of large casting machines.
1. Check whether the rotation and pressure of each mixer of the casting machine are normal, whether the heat exchange system, pump and each pressure gauge can work normally, etc. 2. Use a thick film to wear each stick, and then close the chilled radiation State, press the diaphragm.
3. Start the casting machine, check whether the thick sheet and the melt have been adhered firmly and smoothly, and then pull the thick sheet tightly toward the person standing at the exit. 4. Adjust the appropriate working position, and carefully complete all operations.
5. After the production is over, manually adjust the casting machine to the non-working position, and then introduce the material into the receiving tray, and stop the casting machine.
For most users who have purchased a casting machine, I believe everyone is familiar with its structure and characteristics. On the basis of a certain understanding of the equipment, its correct use method can bring huge help to the entire production process.
After purchasing a casting machine, the first thing to do is generally to have a detailed understanding of the product manual. Most of the machinery and equipment will have some dedicated and professional operating terms and procedures, and these are usually rare or even invisible in our daily lives. Therefore, a careful understanding of the product manual is very helpful in this regard. Understanding the machinery and basic functions and control operations is the basis for using a casting machine.
Secondly, in the process of using, we must pay attention to some details. For example, water stains around the casting machine, because water can conduct electricity, and the casting machine itself is a live product, so it is necessary to prevent leakage accidents. Secondly, in order to ensure the normal operation of mechanical equipment, daily maintenance is also essential.